Smart Meters

Valentin Pearson

Other Religion
Heritage
If you want to avoid having a smart meter replace a faulty regular meter, what should you do?

And if it's unavoidable, what can you do to make it so that it doesn't pose all the dangers that one hears about?
 
@Valentin Pearson and @Caduceus

They emit harmful radiation and it negatively impacts the cells of all living things, like preventing growth and blossoming in plants, and can cause a myriad of issues in humans. These two short clips show an example of the readings coming off of them:

"Better off without a smart meter"


"EMF Pulsing causes negative health symptoms"


These two videos here go into more detail on the matter:

"Smart Grid Exposed: Smart Meters (part one)"


Emits data every 90 seconds during a 24-hour period. They read the meter how its used every day as opposed to once every month or two. Entire communities are saturated with one another's smart data. Pumping out radiowaves all the time, 0.1 watts all the time and peaking at 4 watts for 90 seconds once a day is not healthy to have on your wall.

They show an example test of an analog meter with minor radiation detected from the collector box. Also inside a house with no Wi-Fi, a very healthy choice everyone should follow and hardware their internet.

at 5:55 they go back to the house with a smart meter installed to show the difference. Using the radio frequency analyzer. The readings spike way beyond healthy exposure levels within a radius of 6 feet from the device. The loud noise the meter reader emits is an indication of it reaching peak overload.

They apparently have a range of up to 35km or 21 miles. and when that is multiplied by the cross-coverage of all the smart meters in one area, it is evident of the danger it presents.

"Smart Grid Exposed: Smart Meters (part two)"


Dirty electricity: anything that operates at a frequency higher than 60Hz and interrupt clean 60Hz current.

"Smart meters use dangerous radio frequency microwave radiation to measure and monitor your electricity, gas, and water usage. They also create dirty electricity because they are transmitters that interrupt the 60Hz current and then contaminate electric current waves."

The video goes into detail more on what I was posting on in another thread, this time by a different doctor who studied into dirty electricity's effects on the body.

At 2:45 it follows the doctor around as he makes readings and he explains how the meters work. The concept of the smart grid was to measure the usage of all the devices in a household and a community to optimize energy usage (how communist).

They transmit in the Mega hertz range as well. Those who are electro-sensitive respond negatively to the contamination of their living space by these frequency saturations.

"The authorities and the utility companies will not acknowledge dirty electricity because they would have to fix it and they would be held liable for it."

Apparently utility companies can be sued for returning electrical currents through the ground.

My best bet would be to measure your own living space with an EMF meter, see where you're at, then check your neighbors proximity. I would also not move into any new area that has them if you have the decision not to.
 
Unironically, meter of what? Meter of based? Unnecessary purchase as I would break it on first use.

Though if you mean weight, the unretarded answer is just using tapes for it. You know when you're fat, usually.
 
Back
Top